Installation Guide

1010455-2-A

Kohler Co.

INSTALLATION

Apply a ring of plumbers putty or other sealant around the

underside of the strainer according to the putty

manufacturer’s instructions. Position the flat gasket

between the drain ell and the bottom of the bath. Turn the

strainer into the drain ell.

Fig. #2

Drain Ell

Gasket

Strainer

Bath

Apply Plumbers Putty

Tighten the drain ell securely by inserting pliers handles

into the top of the strainer, as shown. Make sure the drain

ell tube is facing the front of the bath. Remove any excess

sealant.

Fig. #3

Attach the gasket to the overflow ell, as shown. Make sure

the tapered end of the gasket is facing up.

Lubricate the O-rings on the overflow ell, and insert the

overflow ell into the tube. Align the overflow ell with the

overflow hole in the bath.

Fig. #4

Overflow Ell

Gasket

Tube