Installation Guide

2
112035-2-AA (A)
Kohler Co., Kohler, WI
INSTALLATION
Apply a ring of plumbers putty or other sealant around
underside of strainer according to the putty
manufacturer’s instructions. Set flat, gasket between
drain ell and the bottom of the bath. Turn strainer into drain
ell.
Fig. #2
Drain Ell
Gasket
Strainer
Bath
Plumbers putty
Tighten drain ell securely by inserting pliers handles into
top of strainer as shown. The handles will catch on bosses
inside of strainer as the strainer is turned into drain ell.
Make sure drain ell tube is facing the front of bath.
Remove excess sealant.
Fig. #3
Attach the gasket to the overflow ell as shown. Make sure
that the tapered end of the gasket is facing up.
Lubricate O-rings on overflow ell and insert into tube.
Align overflow ell with overflow hole in bath.
Fig. #4
Overflow Ell
Gasket
Tube
From inside the bath, assemble hold down plate to
overflow ell with screws provided. Tighten all screws.
Fig. #5
Hold Down Plate