Manualshelf

Installation Guide

ManualsBrandsKOHLER ManualsKitchen FaucetsSensate Touchless Kitchen Faucet with 15-1/2-in Pull-Down Spout, Docknetik Magnetic Docking System, and A 2-Function Sprayhead Featuring Sweep Spray Vibrant Ombre Rose Gold/Polished Nickel
12345678910
2. Connect the Hoses
CAUTION: Risk of restricted water flow and product damage.
Supply hoses must not be taut, kinked, or twisted during
installation. If the supply hoses must be coiled, maintain an inside
diameter of 3″ (76 mm).
Connect the Supplies
Assemble the outlet hose to the faucet.
Connect and tighten the supply hoses to the supply stops.
Place a bucket under the outlet hose.
Turn on the water supplies.
Flush hot and cold water into a bucket for 1 minute to remove
any debris.
Connect the Spray Hose
Remove the protective cap.
NOTE: The weight must be installed onto the spray hose to act as a
pull stop and to prevent kinking damage.
Solenoid
Clamp
Weight
Outlet Hose
Ø 3" (76 mm)
Min
Supply
Hose
Kohler Co. 5 1186051-2-F