Installation Sheet

8. Complete the Installation
Turn on the water supplies.
Check for leaks at all connections. Repair as needed.
Turn the remote valve handle to the ON position.
Check for leaks at all connections. Repair as needed.
Activate the handshower. Check for leaks at the connections.
Tighten the connections as needed.
Turn off the water, and check that the lift knob drops back to its
original position.
Turn on the water, and verify that water is only flowing from the
spout.
Care and Cleaning
For best results, keep the following in mind when caring for your
KOHLER product:
Lift Knob
Handshower
Check for leaks.
Kohler Co. 11 1276522-2-A