Installation Sheet

Roughing-In
1. Prepare the Site
NOTE: To simplify future servicing, install an access panel to reach
the plumbing.
NOTICE: The remote valve may be installed anywhere on the deck.
To allow adequate clearance for handle rotation, provide a minimum
distance of 5-3/4″ (146 mm) from the center of the spout to the
center of the valve.
Determine the mounting hole locations for the spout diverter and
remote valve. Refer to the roughing-in dimensions illustrated for
proper placement and diameters.
For a finished bath deck/rim less than 5/8″ (16 mm) thick: Install
wood reinforcement to the underside of the deck/rim. The
combined thickness of the reinforcing material and the deck/rim
must not exceed 3″ (76 mm).
CAUTION: Risk of property damage. Select a cutting tool
appropriate for the deck/rim surface type. Refer to the
surface manufacturer’s instructions for proper cutting
procedures.
1-11/16"
(43 mm)
9-3/16"
(233 mm)
5-13/16"
(148 mm)
5/8"
(16 mm)
Min
3"
(76 mm)
Max
8-1/4"
(210 mm)
6-1/2"
(165 mm)
1-1/8"
(28 mm)
Ø 1-1/2"
(38 mm)
Max
Ø 1-1/2"
(38 mm)
Max
5-3/4"
(146 mm)
Min
Ø 1-1/2"
(38 mm)
Max
Kohler Co. 3 1276522-2-A