Installation Guide

1. Faucet Installation
Clean the lavatory surface to remove any grease, oil or debris.
Apply plumbers putty or other sealant around the underside of
the putty ring according to the manufacturer’s instructions.
Position the putty ring on the faucet with the sealant side away
from the faucet body.
Insert the faucet through the lavatory holes.
Check the faucet alignment and carefully tighten the nuts until
secure. Do not wrench tighten.
Wipe away any excess sealant.
Faucet Body
Dished Washer
Locknut
Apply Plumbers
Putty
Kohler Co. 3 1010449-2-B