Installation Guide

Before You Begin
WARNING: Risk of scalding. High water temperature can
cause severe burns. Set the water temperature at or below
120°F (49°C) following the adjustment procedure in the valve
Installation and Care Guide.
CAUTION: Risk of personal injury. If the rain panel is not
securely held in place during installation, the product may
fall causing personal injury. Get help when installing the
panel assembly and waterways.
Observe all local plumbing and building codes.
Read these instructions and determine all required components
along with their installation locations before beginning this
installation.
A shower valve must be installed upstream for temperature and
shut off control.
Requires DTV or push button valve K-76746 and panel trim
K-76732.
A dropped ceiling (not shown) is required in the shower area
where this product is to be installed.
1287911-2-B 4 Kohler Co.