Specification Sheet

Cutout for finished walls

Notes

Technical Information

Install this product according to the installation

guide.

All product dimensions are nominal.

Avoid cross-flow conditions. Do not install shut-off

device on either valve outlet.

Cap the shower outlet if deck-mount spout,

diverter, or handshower is connected to the spout

outlet.

Install straight pipe or tube drop of 7" (178 mm)

to 18" (457 mm) with single elbow between the

valve and wall-mount spout.

For finished walls greater than 3/4" (19 mm) and

less than 1-1/2" (38 mm), install support(s) 2" (51

mm) from the stud face.

For finished walls greater than 1-1/2" (38 mm),

install support(s) 3" (76 mm) from the face of the

finished wall.

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

6-15-2017 12:37

Rite-Temp

Valve Body Rough-In

K-8300-KS