Dimensions Guide

Features
•
Includes valve body, rough-in guide and test cap
•
1/2" Universal NPT & direct sweat inlets & outlets, with stops
•
Service stops supplied loose (not factory installed in valve body)
- ready for making sweat connections to valve inlets
•
Service stops include integral check valves
•
Requires valve cartridge and trim to complete installation (sold
separately).
Material
•
Forged De-zincification Resistant Brass body provides long
term reliability and resistance to aggressive water conditions
Installation
•
Designed for use in standard, back to back and thin wall
installations
Codes/Standards
ASME A112.18.1/CSA B125.1
•
Valve body features integral mounting locations and symmetrical
valve inlets to simplify installation
KOHLER
®
Faucet Lifetime Limited
Warranty
•
Rough-in guide designed for both standard and thin wall
installations
See website for detailed warranty information.
•
Installed valve rough-in can be flushed and pressure tested to
150psi max (air or water) without cartridge, using K-10351 Test
Cap (supplied)
Required Accessories
K-8305/K-P8305 Series Rite-Temp® Cartridges
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 14:53
Rite-Temp
®
Valve Body Rough-In
K-8300-KSL