Dimensions Guide
32”
Notes
Technical Information
Measure your actual product for rough-in details.
All product dimensions are nominal.
Install this product according to the installation
instructions.
Drop-in, Under-mount, Three-wall alcoveInstallation:
EndDrain location:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
40-1/2" x 20" (1029 mm x 508 mm)Basin area, bottom:
52-3/4" x 24" (1340 mm x 610 mm)Basin area, top:
250 lbs (113.4 kg)Weight:
Kit is required for under-mount installations (sold
separately).
58 lbs/ft² (283.2 kg/m²)Minimum floor load:
13-5/8" (346 mm)Water depth:
ADA compliant when installed to the specific
requirements of these regulations.
60 gal (227.1 L)Water capacity:
Drop-in, 58-1/2" x 30-1/2" (1486 mm x
775 mm)
Cutout:
Under-mount, K-586, required, not
included
Template:
2-1/4" (57 mm)Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-7-2019 08:58 - US/CA
Tea-for-Two
®
5' Bath
K-850


