Specification

Technical Information
Fixture*:
Bathing well:
Basin area, bottom 40-1/2″ (102.9 cm) x 20″ (50.8 cm)
Basin area, top 52-3/4″ (134 cm) x 24″ (61 cm)
Weight 290 lbs (131.5 kg)
To overflow:
Water depth 13-5/8″ (34.6 cm)
Capacity 60 gal (227.1 L)
* Approximate measurements for comparison only.
Pump kW V A*
1.5 240 11
* Approximate measurements for comparison only.
Drop-in cut-out 58-1/2″ (148.6 cm) x 30-1/2″
(77.5 cm)
Cut-out for undermount K-586 template
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 208-240 V, 20 A, 50/60 Hz
Installation Notes
NOTE: Pump protrusion beyond rim.
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
60 lbs/square foot (290 kg/square meter) loading.
Cast iron whirlpools are extremely heavy, making some
drop-in installations difficult. Splitting the deck/surround is
recommended if installing into a deck.
K-852-H2
14" (35.6 cm)
60" (152.4 cm)
32" (81.3 cm)
18-1/4"
(46.4 cm)
1-1/2" OD
16"
(40.6 cm)
1-5/8"
(4.1 cm)
2-1/2"
(6.4 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
1-3/4" (4.4 cm)
1/4" (6 mm)
Note:
Pump Protrusion Beyond Rim
3/4" (1.9 cm)
Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-7169-AF or K-7169M-AF)
Product Diagram
TEA-FOR-TWO
®
TEA-FOR-TWO
®
5’ BATH WHIRLPOOL
Page2of2
1019494-4-
E