Rough-In Guide

ManualsBrandsKOHLER ManualsAlcove BathtubsBellwether 5 ft. Rectangle Right Drain Soaking Tub in Biscuit

Product Information

Applicable product:

Bath with apron – left drain K-875

Bath with apron – right drain K-876

ADA compliant when installed per Section

607 of the Act.

Fixture*:

Bathing well:

Basin area, bottom 41-1/4″ (104.8 cm) x

18-3/16″ (46.2 cm)

Basin area, top 51-1/4″ (130.2 cm) x

23-5/16″ (59.2 cm)

Weight 298 lbs (135.2 kg)

To overﬂow:

Water depth 11-5/16″ (28.7 cm)

Capacity 44 gal (166.6 L)

* Approximate measurements for comparison only.

Required accessories:

Clearﬂo cable bath drain, less PVC tubing K-7214

Fitting/pipe kit K-7261

Optional accessories:

Stillness

wall-mount bath spout K-952

Oblo

wall-mount bath spout K-10044

Purist

wall-mount non-diverter bath

spout, 35°

K-14426

Purist

wall-mount non-diverter bath

spout, 90°

K-14427

Coralais

non-diverter bath spout K-15137

Coralais

diverter bath spout K-15138

Margaux

wall-mount bath spout K-16246

Installation Notes

Install this product according to the installation guide.

Floor support under bath must provide for a minimum of

52 lbs/square foot (252.8 kg/square meter) loading.

Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All

dimensions are nominal.

60" (152.4 cm)

3-15/16" (10 cm)

11-7/8"

(30.2 cm)

4-1/4"

(10.8 cm)

32"

(81.3 cm)

15-15/16"

(40.5 cm)

2-3/4"

(7 cm)

2" (5.1 cm)

14-7/8"

(37.8 cm)

1/4" (6 mm)

1-1/2" PVC Tee

No change in measurements if connected with

drain and fitting/pipe kit illustrated.

(K-7214 and K-7261)

Rim Flange Detail

5/8"

(1.6 cm)

1/4"

(6 mm)

1/2"

(1.3 cm)

7" (17.8 cm)

"X" Depending on length and angle

"X"

Spout Detail

Note: To clear the bath rim end wall, a minimum

7" (17.8 cm) bath spout is recommended.

Water flow from angled bath spouts less than

7" (17.8 cm) may also provide needed clearance.

Finished Wall

Roughing-In

K-875, K-876

BELLWETHER

BATH WITH APRON

BELLWETHERTM BATH WITH APRON

1074694-1-