Installation Guide

3. Install the Spout
Position the spout on the faucet body so it faces toward the user.
Tighten the spout nut while holding the spout in place.
4. Install the Handspray
Slide the gasket, if provided, onto the spray holder. If a gasket is
not provided, apply plumbers putty to the underside of the spray
holder.
Slide the spray holder through the mounting hole from above.
Hand tighten the nut from under the sink.
If applicable, remove any excess plumbers putty.
Insert the spray hose through the spray holder.
Attach the spray hose to the faucet spray tube using thread
sealant.
Faucet Body
Spout Nut
Spout
Faucet
Spray
Tubing
Sink
Nut
Handspray
Mounting
Hole
Hose Fitting
Spray
Holder
1015079-2-F 4 Kohler Co.