Installation Guide

1. Install the Showerhead
NOTE: The shower arm with flange are not provided.
Apply thread sealant tape to the threads of the shower arm.
Turn on the water and allow water to flow through the shower arm to flush the
system of any debris.
Turn off the water.
Hand tighten the showerhead to the shower arm.
Use a clean wrench to completely tighten the showerhead to the shower arm; be
careful not to mar the finish.
Check all connections for leaks.
Installer la pomme de douche
REMARQUE: Le bras de douche avec la bride n’est pas fourni.
Appliquer du ruban d’étanchéité pour filets sur les filets du bras de douche.
Permettre à l’eau de circuler à travers le bras de douche pour purger le système
de tout débris.
Couper l’eau.
Visser la pomme de douche sur le bras de douche.
Utiliser une clé propre pour entièrement serrer la pomme de la douche sur le bras
de la douche, en veillant à ne pas gâter la finition.
Vérifier s’ilyadesfuites dans les connexions.
Instale la cabeza de ducha
NOTA: No se incluye el brazo de ducha con brida.
Aplique cinta selladora de roscas a las roscas del brazo de ducha.
Abra el agua y deje que el agua fluya por el brazo de ducha para limpiar el
sistema de partículas y residuos.
Cierre el agua.
Apply thread sealant tape.
Appliquer du ruban d'étanchéité pour filetage.
Aplique cinta selladora de roscas.
1155528-2-A 4 Kohler Co.