Rough-In Guide

Product Information
Fixture:
Weight 68 lbs (30.8 kg)
Drain hole 3-3/8″ (8.6 cm) D.
Configuration one-piece
Recommended accessories:
Drain K-9132
Installation Notes
Install this product according to the installation guide.
IMPORTANT! When installing this unit with Kohler Portico
shower doors, the receptor will need to be recessed a
minimum of 1/2″ (1.3 cm) in from the water-resistant wall
material to ensure proper door placement.
Shimming may be required to level the fixture.
Stud opening tolerance is + 1/4″ (6 mm), - 0″ (0 mm).
When fire rated construction is specified, dimensions are to
the inside of the fire-rated wall.
Some shimming between stud frame and fixture may be
required.
This fixture conforms to ANSI Standard Z124.1.2. All
dimensions are nominal.
1/2" (1.3 cm) Min
Recess Detail For
Portico™ Doors
Water-Resistant
Wall Material
30" (76.2 cm)
1-1/2"
(3.8 cm)
4-3/8"
(11.1 cm)
3-3/16"
(8.1 cm)
6"
(15.2 cm)
4-1/2"
(11.4 cm)
35-3/4" (90.8 cm)
34"
(86.4 cm)
2-7/16" (6.2 cm)
Flat
8-7/16"
(21.4 cm)
9/16"
(1.4 cm)
K-9568
60" (152.4 cm)
Roughing-In
K-9568
MEMOIRS
®
60″ (152.4 cm) ONE-PIECE ACRYLIC SHOWER RECEPTOR
MEMOIRS
®
60″ (152.4 cm) ONE-PIECE ACRYLIC SHOWER RECEPTOR
86033-1-
BC