Specification Sheet

INFINITY∞ BATH
BATH WHIRLPOOL
FEATURES
• 72” x 42” x 24”
• Acrylic
• System III - 2 hp variable flow pump with integral
heater, electronic switch, and pulsating neckjets with
pillow
• 6 Flexjets
• UL Listed
• LESS ALL TRIM
• Drilled for K-9596 grip rails (required)
• Autofill bath system
• Pump is supplied with a grounding-type plug in cord
CODES/STANDARDS APPLICABLE
Specified model meets or exceeds the following:
• ANSI Z124.1
• ASME/ANSI A112.19.7M
• IAPMO/UPC
• Underwriters Laboratories (UL)
• State of Massachusetts
K-1466-H1, K-1466-N
COLORS/FINISHES
• 0 White
• Other Refer to Fixtures Price Book for additional colors
Accessories:
• CP Polished Chrome
• PB Polished Brass
• Other Refer to Faucets Price Book for additional finishes
• NA None Applicable
SPECIFIED MODEL:
Model Description Colors/Finishes
K-1466-H1 Bath whirlpool less neckjets and pillow
0 White Other______
K-1466-N Bath whirlpool with neckjets and pillow
0 White Other______
Required Accessories
K-9696 Jet trim kit
CP PB Other______
K-9589 Flair faucet trim kit (with drain)OR
CP PB
K-9599 Alterna faucet trim kit (with drain)
CP PB Other______
K-9591 Autofill Flair mixer handle OR
CP PB
K-9603 Autofill Alterna mixer handle
CP PB Other______
K-9596 Grip rails (pair)
CP PB Other______
Optional Accessories
K-1179 Vinyl tiling-in bead (use when wall material contacts any top surface of bath)
NA
PRODUCT SPECIFICATION:
The bath whirlpool shall be 72” in length, 42” in width, and 24” in height. Bath whirlpool shall be made of acrylic. Bath whirlpool
shall have System III, with 6 Flexjets, 2 hp variable flow pump with integral heater, electronic switch, and pulsating neckjets
with pillow. Bath whirlpool shall be UL Listed. Bath whirlpool shall be less all trim. Bath whirlpool shall be drilled for K-9596 grip
rails(required). Bath whirlpool shall have Autofill bath system. Bath whirlpool pump shall be supplied with a grounding-type
plug-in cord. Bath whirlpool shall be Kohler Model K-1466-_______-_______.
Page 1 of 2
114127-4-BA (C)
We reserve the right to make revisions without notice in the design of fixtures or in packaging
unless this right has specifically been waived at the time the order is accepted.