Installation Guide

Roughing-In
1. Prepare the Site
CAUTION: Risk of property damage. Select a cutting tool
appropriate for the deck/rim surface type. Refer to the
surface manufacturer’s instructions for proper cutting
procedures.
NOTE: To simplify future servicing, install an access panel to reach
the plumbing.
NOTICE: The remote valve may be installed anywhere on the deck.
To allow adequate clearance for handle rotation, provide a minimum
distance of 5-3/4″ (146 mm) from the center of the spout to the
center of the valve.
Determine the mounting-hole locations for the spout diverter and
remote valve. Refer to the roughing-in dimensions illustrated for
proper placement and diameters.
5/8"
(16 mm)
Min
3"
(76 mm)
Max
Ø 1-1/2"
(38 mm) Max
Ø 1-1/2"
(38 mm)
Max
5-3/4"
(146 mm) Min
Ø 1-1/2"
(38 mm) Max
6-3/4"
(172 mm)
9-1/4"
(235 mm)
8-1/32"
(204 mm)
7-7/16"
(189 mm)
5"
(127 mm)
Kohler Co. 3 1330094-2-A