Specification

Features

•

Brass construction

•

Floor mount installation

•

8-1/2″ (216 mm) spout reach

•

Non-laminar ﬂow

•

Integral valve

•

Includes handshower

•

Includes aerator, hardware kit, and escutcheon

•

Complements Stillness

Suite

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

•

ASME A112.18.1/CSA B125.1

•

ASSE 1014

FLOOR MOUNT BATH FILLER WITH

HANDSHOWER

K-994-4

Colors/Finishes

•

CP: Polished Chrome

Speciﬁed Model

Model Description Colors/Finishes

K-994-4 Floor-mount bath ﬁller with handshower ❑ CP

Product Speciﬁcation

The ﬂoor-mount bath ﬁller shall be made of brass construction. Product shall be ﬂoor-mount installation. Product shall have

8-1/2″ (216 mm) spout reach. Product shall have a non-laminar ﬂow. Bath ﬁller shall include handshower, aerator, hardware kit,

and escutcheon. Product shall have an integral valve. Product shall complement the Stillness suite. Bath ﬁller shall be Kohler

Model K-994-4-CP.

STILLNESS

Page 1 of 2

1144499-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

PAGE 1
STILLNESS® Features • • • • • • • • Brass construction Floor mount installation 8-1/2″ (216 mm) spout reach Non-laminar flow Integral valve Includes handshower Includes aerator, hardware kit, and escutcheon Complements Stillness® Suite FLOOR MOUNT BATH FILLER WITH HANDSHOWER K-994-4 Codes/Standards Applicable Specified model meets or exceeds the following: • ASME A112.18.1/CSA B125.
PAGE 2
STILLNESS® Installation Notes Install this product according to the installation guide. WARNING: Risk of personal injury. Do not use the bath filler as a grab bar or support bar when entering or exiting the bath. The bath filler is not designed to support weight. NOTICE: Adequate floor support is required. The wood support must be a minimum of 2” (51 mm) thick by 6” (152 mm) wide. 2x6 lumber is NOT adequate for this application. Consult local codes for the appropriate air gap requirements.