Installation Sheet

1241236-2-A Kohler Co.
Hardware Placement Guide
1" (25 mm) Door Pull
Location
Drawer Pull
Location
4-5/8"
(117 mm)
3" (76 mm)
4-5/8"
(117 mm)
Centered
Side to Side
Hardware Placement for K-99686 and K-99689
Hardware Placement for K-99689
□□ Measure and mark the dimensions for the hardware on the drawers and the doors.
□□ Drill a 3/16” (21 mm) hole at each marking.
□□ Insert a screw through the top hole from the inside. Count the number of visible notches on the
screw that appear from the other side.
□□ Remove the screw and using a pair of side cuers, cut the screw at the appropriate notch. Repeat
for each screw.
□□ Insert a screw through a hole, and align with a handle. Thread the handle onto the screw. Repeat
for each handle.
Drawer Pull Location
4-1/4"
(108 mm)
4-5/8"
(117 mm)
3" (76 mm)