Owner's Manual

Web Settings – Music
Web page path: Settings > Music
Function: allows adjustment of default audio settings and changes to the Bluetooth pairing settings.
NOTE: To see the [Music] menu on the controller Web pages, the K-99696 amplifier must be installed and
connected to the system controller. To hear audio signals through the amplifier, speakers must be properly
connected to the amplifier. Refer to the amplifier Installation and Care Guide.
To adjust the default settings for audio output, click and drag the vertical rod along the horizontal
bar for each of the four settings.
If a Bluetooth device is currently paired to the system, the device ID will be displayed in the
″Current Bluetooth Connected Device″ field.
NOTE: The ″Current Bluetooth Connected Device″ field cannot be edited. It is for information purposes
only.
To change Bluetooth paring settings, enter the new reporting key and/or password.
Settings Service
Music
InterfaceUsersSystem Valve 1 Valve 2
Default
Volume
Treble
50%
50%
Bass
Balance
0
50%
Current Bluetooth Connected Device
Bluetooth
New Key:
Reporting Key
XXXX
New Pin:
Bluetooth Password
0000
Lighting Steam
About
1241234-5-A 30 Kohler Co.