Owner's Manual

Web Settings – Steam
Web page path: Settings > Steam
Function: allows adjustments to default steam temperatures and duration, and indicates the number of
minutes left before ″Power Clean″ must be activated.
NOTE: To see the [Steam] menu on the controller Web pages, a KOHLER steam generator must be
installed and connected to the system controller, and the feature must be enabled on the [System] Web
page.
NOTICE: The steam system is set to allow for 600 minutes of usage before a cleaning cycle is required.
After 600 minutes, the cleaning cycle must be completed in order to activate steam use and reset the
600-minute counter.
NOTICE: Power clean will run for 45 minutes. Once activated, you must remain out of the steam area
until the cleaning cycle has completed.
To adjust the default and maximum temperature settings, click the up or down arrows to the right
of the temperature field.
To adjust the default steam duration, click the up or down arrows to the right of the time field.
To initiate a power clean cycle, click [Start Power Clean].
CAUTION: Stay out of the steam area until the cleaning cycle is complete.
Settings Service
About
Steam
Max Temperature
Default Time
(minutes)
Time remaining before Power Clean (minutes)
MusicInterfaceUsersSystem Valve 1 Valve 2 Lighting
Default Temperature
Power Clean
110
125
10
580
Start Power Clean
1241234-5-A 32 Kohler Co.