Owner's Manual

Shower – Start
Path: shower > start
Enter Shower Features
From the home screen, touch the [shower] icon.
The shower screen will appear with the default shower outlet highlighted/selected.
Touch available shower outlet icons to select/deselect other outlets that will turn on when water
flow starts.
Target temperature: the up/down arrows will be illuminated, allowing adjustment of target
temperature before starting water. Refer to the ″Shower – Adjust Temperature″ section.
Turn Shower Features On
NOTE: If the auto-purge feature is enabled, a [shower warm-up] pop-up will appear when the [start] icon
is touched. Refer to the ″Auto Purge″ section.
On the [shower] screen, touch the green [start] icon to begin water flow from selected/highlighted
shower outlets.
A red [stop] icon will appear, indicating that water is flowing from the selected outlets.
Touch available shower outlet icons to turn on/off other outlets at any time water is flowing.
Selected shower outlet will remain ON until the [stop] icon is touched.
Temperature adjustment: the up/down arrows will be illuminated, allowing temperature
adjustment at any time water is running. Refer to the ″Temperature Adjustment″ section.
home
Monday
25 July 2014
8:32
usersshower
spa
settings
stop
shower
home
massage
start
8:32am
101˚
zone 1 zone 2
shower
home
massage
stop
target: 101˚
8:32am
88˚
zone 1 zone 2
target temperature
Kohler Co. 51 1241234-5-A