Owner's Manual

Music – Controls
Path: music > listen
Function: allows adjustments to an audio signal from a device connected to the amplifier.
NOTE: To see the [music] icon on the interface home screen, the K-99696 amplifier must be installed and
connected to the system controller. To hear audio signals through the amplifier, speakers must be properly
connected to the amplifier. Refer to the amplifier Installation and Care Guide.
From the home screen, touch the [music] icon.
The [listen] tab is displayed which contains information for any connected device, and controls for
playing and adjusting an audio signal.
If paired to a Bluetooth device, the device ID (name) will be displayed.
To play music from a connected device, touch the [play] icon.
While music is playing, the song artist and title will display below the device ID if the streaming
source provides that information.
To pause the audio sound, touch the [pause] icon. To begin playing again, touch the [play] icon.
NOTE: For a radio and line-in source, the pause option will not pause a currently playing song. Touching
the [play] icon will resume the audio source to ″real time.″
To adjust the volume, touch the circle to slide it along the bar. Slide up to increase volume; slide
down to decrease volume.
Depending on the steaming source, the backward/forward arrows will either skip to the
previous/next song, track, or station. The forward arrow does not allow rapid advance of the audio
signal.
home
Monday
22 July 2014
8:32
spa settingsstop
usersshower
steam
music
lighting
volume
music
8:32am
home play
options
listen input
Device ID
volume
music
8:32am
home pause
options
listen input
Device ID
Artist
Title
1241234-5-A 68 Kohler Co.