Owner's Manual

Initial System Setup
IMPORTANT! To access the controller Web pages for system setup, the controller and a computer or
tablet must be connected to the same router.
System setup is configured using the controller Web pages.
The controller IP address is obtained from the digital interface.
Obtain the IP Address
From the [home] screen on the interface, touch the [settings] icon. If an access code is required, enter
″1020.″
Select the [system] option, then [about].
A pop-up window will display current software information for connected components.
If the IP address is not displayed, refer to the ″Download/Install Software″ section for instructions
on connecting to a router.
Copy the IP address from the displayed information.
Connect to the Controller Web Pages
Connect a computer or tablet to the same router as the controller.
Open a browser window and enter the IP address into the search field.
The controller Web pages will appear in the browser, providing access to configure system settings.
Controller
Hardware: v0.0.0.0
Firmware: v0.0.0.0
IP: 0.0.0.0
MAC: 00:14:6F:0E:34:4A
User Interface 1
OS: v0.0.0.0
Graphics: v0.0.0.0
Language: v0.0.0.0
TouchPanel: v0.0.0
about
ok
settings
system
about
Interface
IP
Controller
Router
Computer
or Tablet
Ethernet
Cable
Kohler Co. 7 1241234-5-A