Owner's Manual

Spa – Setup
Path: spa > [choose experience] > options
Function: allows selection of spa intensity level, beep setting, and duration.
Factory default: medium, beep off, short
NOTE: For the [spa] icon to be displayed on the interface home screen, spa must be enabled on the
controller Web pages. To enable the spa feature, refer to the ″Web Settings – System″ section.
NOTE: Spa can be initiated whether shower is on or off. The spa feature will override running shower
features, including massage. It will also override any active timers.
From the home screen, touch the [spa] icon.
The spa menu is populated based on shower configuration. Up to three spa experiences may be
available depending on valve configuration.
To select a spa experience, touch one of the available options on the [spa] screen. Only one
experience can be selected at a time.
Touch the [options] icon to change spa intensity and duration as desired.
A pop-up window will appear displaying the available choices:
To bypass shower warm-up, touch [skip].
While a spa experience is running, the interface screen displays several indicators:
•
Intensity: dictates the rate at which the experience runs.
•
Beep: when enabled, the interface will beep once at the end of each segment of the spa experience.
•
Duration: long and short time durations are available for each spa experience. The long time frame
is ten minutes the short time frame is 5 minutes.
To apply the selected options, touch the [ok] icon. This does not initiate the spa function. To start a
spa experience, refer to the ″Spa – Start″ section.
options
start
8:32am
spa
focus
home
breathe
relax
home
Monday
22 July 2014
8:32
spa
settings
steam
music
lights
stop
users
shower
options
8:32am
spa
home
spa intensity level
medium
professional
mild
long
short
ok
beep
Kohler Co. 71 1241234-5-A