Owner's Manual

Spa – Start
Path: spa > [choose experience] > start
Function: initiates a spa experience.
Factory default: off
NOTE: For the [spa] icon to be displayed on the interface home screen, spa must be enabled on the
controller Web pages. To enable the spa feature, refer to the ″Web Settings – System″ section.
NOTE: Spa can be initiated whether shower is on or off. The spa feature will override running shower
features, including massage. It will also override any active timers.
From the home screen, touch the [spa] icon.
The spa menu is populated based on shower configuration. Up to three spa experiences may be
available depending on valve configuration.
To select a spa experience, touch one of the available options on the [spa] screen. Only one
experience can be selected at a time.
Touch [start] to begin the experience.
If water was not running, a ″shower warm-up″ pop-up window will appear showing the current
water temperature. A red chevron (double arrows) appears next to the temperature display until the
target temperature is reached.
To bypass shower warm-up, touch [skip].
While a spa experience is running, the interface screen displays several indicators:
•
Timer: the total remaining time of the spa experience is displayed at the top right corner of the
screen.
•
Countdown clock: spa experiences consist of segments (phases). The remaining time of each
segment is displayed in the middle of the screen.
•
Target timeline: under the [target] bar, temperatures shown in the middle are targets for the current
spa segment. Temperatures at the left are targets for the previous segment, and to the right are
targets for the next segment.
spa
home
stop
target
102˚
1:57
09:59
102˚
90˚
102˚
90˚
102˚
options
start
8:32am
spa
focus
home
breathe
relax
spa
home
stop
target
102˚
1:57
09:59
102˚
90˚
102˚
90˚
102˚
skip
shower warm-up
88˚
target: 101˚
1241234-5-A 72 Kohler Co.