Owner's Manual

Spa – Adjust Script
Path: spa > [choose experience] > start
Function: allows alterations to pre-programmed spa scripts (temperature and segment duration).
NOTE: For the [spa] icon to be displayed on the interface home screen, spa must be enabled on the
controller Web pages. To enable the spa feature, refer to the ″Web Settings – System″ section.
NOTE: Spa can be initiated whether shower is ON or OFF. The spa feature will override running shower
features, including massage. It will also override any active timers.
Adjust Spa Temperature
While a spa experience is running, the interface screen displays target temperature information for
previous, current, and next spa segments.
The current target temperature is displayed in the middle.
The temperature can be adjusted any time during the spa experience.
NOTE: Adjustments to the current target temperature also apply to target temperatures for any remaining
spa segments. The adjustments are applied to the next segment target temperatures at the same
differential. For example, if the current target is adjust 2° higher, any remaining segment targets will also
adjust 2° higher.
To adjust the target temperature(s), touch the blue or red temperature arrows next to the power
icon.
A pop-up window will appear showing the target temperature(s) changing.
NOTE: During spa experiences, valve zones cannot be linked or unlinked, so the link icon will be grey. If
the temperature is adjusted for one zone, it will also be adjusted for the second zone.
Once the new target temperature is reached, the pop-up window disappears, returning the interface
to the spa screen.
The new target temperatures are displayed for the current and any remaining segments.
Adjust Spa Segments
spa
home
stop
target
102˚
1:57
09:59
102˚
90˚
102˚
-
-
spa
home
stop
target
105˚
0:25
08:34
102˚
102˚
90˚
90˚
102˚
1241234-5-A 74 Kohler Co.