Owner's Manual

Time – Alarm Clock
Path: [time clock]
Function: sets the interface to beep at a designated time.
NOTE: The alarm feature provides a beep trigger only. It will not turn off any active features. To turn
features OFF, refer to the ″Interface – Turn Features Off″ section.
Set the Alarm
Touch the time clock on any screen.
NOTE: The clock is located above the home screen icons, or at the right top corner of all other screens.
A pop-up window will appear showing the current time.
Touch the [alarm] option.
To program the alarm time, touch the up arrow. The time adjusts in 1-minute increments each time
the arrow is touched. To adjust in 5-minute increments, press and hold the arrow.
Touch [start] to turn the alarm ON. The pop-up window will disappear, returning the interface to
the previous screen.
While the alarm is on, an alarm clock icon appears to the left of the time clock.
When the time display reaches one minute before the alarm time, the interface will beep once.
When the alarm time is reached, the pop-up window appears showing the current time, and the
interface will beep every ten seconds.
The beeps cease after two minutes, or when the user touches [ok], [x], or the power icon.
Cancel the Alarm
To stop the alarm, touch the time clock on any screen.
The pop-up window will appear showing the programmed alarm time.
Touch [stop] to cancel the alarm. The pop-up window will disappear, returning the interface to the
previous screen, and the alarm clock icon will disappear.
08:32
home
spa settingsstop
8:32am
start
0 8:4 5
minute timer
alarm
home
usersshower
spa
settings
stop
target: 101˚
101˚
08:32
home
usersshower
spa
settings
stop
target: 101˚
101˚
ok
0 8:4 5
time reached
Kohler Co. 77 1241234-5-A