Owner's Manual

Shower Configurations – Overview (cont.)
Massage
IMPORTANT! For proper function, all shower fittings on the same valve that are enabled with massage
must have total equal flow rates. For example, if one valve outlet supplies water to two bodysprays, the
total flow rate of both bodysprays must equal the flow rate of a single fitting supplied by a different
outlet.
Spa
IMPORTANT! For proper function for a multiple valve system, valve 1 (zone 1) must be connected to the
system controller before valve 2 (zone 2). Confirm that valve 1 appears on the contoller Web page before
connecting the second valve to the controller. Refer to the ″Web Settings – Valve″ section.
For the [spa] icon to be displayed on the interface home screen, spa must be enabled on the
controller Web pages. To enable the spa feature, refer to the ″Web Settings – System″ section.
Use of configurations other than the preprogrammed options will LIMIT preprogrammed spa and
massage functions.
Kohler Co. 9 1241234-5-A