Specification Sheet

3/4"
Notes
Required Electrical Service
Install this product according to the installation
guide.
One circuit required.
120 V, 15 A, 60 HzLights:
Recommended that the product be installed by
a qualified electrician.
Technical Information
All product dimensions are nominal.
Maximum load is 120 V, 60 Hz, 10 A.
Lights: 120 V, 10 A, 60 HzElectrical component
rating:
Requires a plastic electrical box 3” (76 mm) x 2”
(51 mm) x 2-3/4” (70 mm) or larger, minimum
volume of 14 cubic inches.
On/off switch will not work if installed in a metal
electrical box.
Do not install to a dimmer switch, a three-way
switch, or a switch that controls an electrical
outlet.
Install using copper wiring only. Connection to a
neutral wire is required.
Building materials may block signal. May need
to move the bridge to another location if the
switch modules do not pair.
Locate within 25 ft (7.62 m) of the bridge.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
6-15-2017 13:51
DTV+
®
On/Off Switch Module
K-99699