Dimensions Guide

ManualsBrandsKOHLER ManualsTub & Shower ValvesRite-Temp Valve Body Rough-in with Service Stops (Supplied Loose) and Universal Inlets, Project Pack Not Applicable

5-7/8" (149 mm)

Inlet Port 1/2"-14 NPT

and 5/8" ID for 1/2"

Nominal Copper Tubing

Cutout for finished walls

less than 3/4" (19 mm)

Cutout for finished walls

greater than 3/4" (19 mm)

Ø 5" (127 mm)

7/8" (22 mm)

Ø 4-1/2"

(114 mm)

Ø 4"

(102 mm)

Cut Line

Ø 1"

(25 mm)

2-15/16"

(75 mm)

2-3/16"

(56 mm)

9/16"

(14 mm)

Outlet Port

1/2"-14 NPT and 5/8" ID

for 1/2" Nominal

Copper Tubing

3-1/2" (89 mm)

2-3/4"

(70 mm)

1-15/16"

(49 mm)

1-15/16"

(49 mm)

Max Finished Wall

Min Finished Wall

Notes

Technical Information

Install this product according to the installation

instructions.

All product dimensions are nominal.

Avoid cross-flow conditions. Do not install shut-off

device on either valve outlet.

Cap the shower outlet if deck-mount spout,

diverter, or handshower is connected to the spout

outlet.

Install straight pipe or tube drop of 7" (178 mm)

to 18" (457 mm) with single elbow between the

valve and wall-mount spout.

For finished walls greater than 3/4" (19 mm) and

less than 1-1/2" (38 mm), install support(s) 2" (51

mm) from the stud face.

For finished walls greater than 1-1/2" (38 mm),

install support(s) 3" (76 mm) from the face of the

finished wall.

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

1-31-2019 18:48 - US/CA

Rite-Temp

Valve Body Rough-In

K-P8300-KSL