Specification Sheet
RITE-TEMP
PRESSURE-BALANCING VALVE
FEATURES
•
Brass valve body
•
Rite-Temp pressure-balancing diaphragm design valve
•
High-temperature limit stop
•
Pressure-balancing mechanism of one-piece diaphragm
cartridge design for ease of maintenance
•
Mixing valve cycles from “cold” to “hot”
•
Available with or without screwdriver stops
•
Available with female stops for CPVC
CODES/STANDARDS APPLICABLE
Specified model meets or exceeds the following:
•
ASME/ANSI A112.18.1M
•
ANSI/ASSE 1016
•
CSA International B125
•
IAPMO/UPC
K-304-K
K-304-K
K-304-KS
K-304-KP
COLORS/FINISHES
• NA Not applicable
SPECIFIED MODEL:
Model Description
K-304-K Less Screwdriver Stops
NA
K-304-KS With Screwdriver Stops
NA
K-304-KP With Screwdriver Stops For CPVC
NA
PRODUCT SPECIFICATION:
Rite-Temp pressure-balancing single-control valve shall feature a brass valve body. The valve shall mix the water from
the “off” position, through the “cold” to the “hot”, and includes a high-temperature limit stop. The pressure-balancing
mechanism shall be of one-piece diaphragm cartridge design for ease of maintenance. Optional feature shall be with or
without screwdriver stops or female stops for CPVC. Rite-Temp valve shall be Kohler Model K-304-_______-NA.
Page 1 of 2
114811-4-CB