Installation Guide

Tools and Materials
Before You Begin
CAUTION: Risk of property damage. Select 250 lb (113.4
kg) load bearing 5/16″ lag bolts with a length to clear
obstacles in the wall and 5/16″ washers. Calculate proper lag
bolt length by adding the following: 1-1/2″ (38 mm) backing
material + wallboard thickness + back rail thickness.
IMPORTANT! Risk of property damage. Use care when moving
the cabinet to avoid impacting, sliding, or side-loading the legs.
NOTE: The K-20199 bridge cabinet is designed to be installed with
the K-20195 vanity and is not intended to be installed individually.
Read both product installation instructions before beginning. The
vanity should be installed before the bridge cabinet.
Observe all local building codes.
To properly secure the cabinet, 2x6 backing material must be
installed behind the finished wall. Refer to the K-20195 vanity
installation instructions for site preparation.
Siliconized Acrylic
Caulk
Plus:
• 5/16" Lag Bolts and Washers
• Pad
• 2x6s
• Common Plumbing and Woodworking
Tools and Materials
1304473-2-A 2 Kohler Co.