Installation Guide

3. Connect the Supplies
Ø 3"
(76 mm)
Min
2" (51 mm) Min
3" (76 mm) Max
CAUTION: Risk of restricted water ow and product damage. The supply
hoses must not be taut, kinked, or twisted. If the supply hoses must be coiled,
maintain an inside diameter of 3" (76 mm).
Connect the water supplies.
Turn ON the water supplies.
Flush hot and cold water for 1 minute to remove any debris.
Turn OFF the water supplies.
Install the weight onto the spray hose.
Position the weight between 2" (51 mm) and 3" (76 mm) above the boom of the
hose loop.
Align the spray hose with the outlet tube and click together.
Turn ON the water supplies and check for leaks.
1466586-2-B
6 Kohler Co.