Installation Guide
6. Install the Soap Box
Connect the soap hose to the soap dispenser hose from the faucet.
Secure one cable tie around the connection and a second just below the
connection.
Verify that the connection is tight. Adjust as needed.
Connect the remaining end of the soap hose to the soap box.
Secure a cable tie around the soap hose just below the connection.
Connect the power cable to the soap box.
IMPORTANT! Make sure that the soap hose does not kink while installing the soap
box.
Position the soap box onto the frame and snap into place.
Verify that the soap box is secure.
Kohler Co. 9
1466586-2-B