Specification

Ø 6-1/2"
(165 mm)
4"
(102 mm)
7-1/2"
(191 mm)
Typical
4-1/4"
(108 mm)
2-15/16"
(75 mm)
2-3/8"
(60 mm)
*If 3-1/2" (89 mm) to
4-1/4" (108 mm) use
K-10305
deep roughing-in kit.
Finished Wall
1/2"-14 NPT
K-304 Valve
Series
6-1/4"
(159 mm)
Ø 1-1/2"
(38 mm) Max
Slip-Fit Spout:
Extend 5/8" OD Tube 5-1/8" (130 mm) To
5-3/8" (136 mm) From Finished Wall.
Ø 2-7/8"
(73 mm)
7-1/8"
(181 mm)
Notes
Technical Information
For use with automatic compensating valves rated
at 1.05 gal/min (4 l/min) or less.
All product dimensions are nominal.
NoDrain included:
Install this product according to the installation
instructions.
Showerhead/Body Spray:
1.75 gal/min (6.6 l/min)Rated maximum flow:
20 psi (1.4 bar)Pressure:
120 psi (827.4 kPa)Fixture pressure max
(static):
Pressure and Supply Requirements
10 psi (68.9 kPa)Fixture pressure min
(static):
Fixture Supply Requirements
10 psi (68.9 kPa)Min static pressure:
120 psi (827.4 kPa)Max static pressure:
10 psi (68.9 kPa)Min flowing pressure:
2.5 gpm (9.5 lpm)Min flow rate:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-4-2020 14:21 - US/CA
Capilano
®
Rite-Temp
®
bath and shower trim set
K-R26930-4G