Installation Guide

4. Connect the Hoses
3" (76 mm)
Min
Supply Hose
Outlet Hose
Check Valve Housing
CAUTION: Risk of restricted water ow and product damage. The supply
hoses must not be taut, kinked, or twisted. If the supply hoses must be coiled,
maintain an inside diameter of 3" (76 mm).
Connect and tighten the check valve housing to each supply.
Connect and tighten the supply hoses to the check valve housings.
Place a bucket under the outlet hose.
Turn ON the water supplies.
Turn the handle to HOT and COLD for 1 minute to ush water into a bucket to
remove any debris. Refer to the “Faucet Operation” section for instructions on
using the handle.
Kohler Co. 7
1485232-2-A