Installation Guide

23. Install the Wall Jambs
NOTE: The fins on the wall jambs face the inside of the shower.
Thoroughly clean the shower walls behind the wall jambs using the provided alcohol wipes before
proceeding
Remove the film from the adhesive on the back of the wall jamb.
Carefully align the bottom of the wall jamb over the threshold, then tilt up toward the wall. The top
of the wall jamb should align with the header.
Press firmly to bond the adhesive to the wall.
Repeat for the second wall jamb.
Right Left
Fin
Fin
1380408-2-B 26 Kohler Co.