Specification

Features

•

Premium material construction.

•

Intended for use with Rite-Temp

or HiFlow Rite-Temp

valves.

•

Traditional lever handle.

•

Includes 5-1/4" (133 mm) diverter bath spout with 1/2" NPT

connection.

Required Accessories

K-304-K Pressure-Balancing Valve Less Stops

K-304-KS Pressure-Balancing Valve With Stops

K-304-CS Pressure-Balancing Valve With Stops

K-304-CX Pressure-Balancing Valve Less Stops

For complete listing of available colors, go to

kohler.com.

K-304-PS Pressure-Balancing Valve With Stops

Codes/Standards

K-304-PX Pressure-Balancing Valve Less Stops

ASME A112.18.1/CSA B125.1

ASSE 1016

K-304-US Pressure-Balancing Valve With Stops

KOHLER

Faucet Lifetime Limited

Warranty

K-304-UX Pressure-Balancing Valve Less Stops

See website for detailed warranty information.

K-2971-KS 3/4" Pressure-balancing Valve

Product Specification

Bath and shower trim shall be made of premium

material construction. Bath and shower trim shall

include 5-1/4" (133 mm) diverter bath spout with

1/2" NPT connection. Bath and shower trim shall

be K-T10274-4A.

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

www.kohler.com

11-18-2013 17:08

Forté

Bath and Shower Trim

K-T10274-4A

PAGE 1
Forté® Bath and Shower Trim K-T10274-4A Features • • • • Premium material construction. Intended for use with Rite-Temp® or HiFlow Rite-Temp® valves. Traditional lever handle. Includes 5-1/4" (133 mm) diverter bath spout with 1/2" NPT connection.
PAGE 2
Forté® Bath and Shower Trim K-T10274-4A For 1/2" NPT threaded spout, Technical Information Installation Notes All measurements are approximate only. NOTICE: Risk of product damage. Long screws, for installing trim, can damage the K-2971-KS valve. Consult the trim installation guide to verify if the thin wall installation kit (88526) is needed. Install this product according to the installation guide. Install the Rite-Temp® valve according to the valve installation guide. Avoid cross-flow conditions.