Specification

Required Accessories
K-304-* Rite-Temp valve OR ❑ NA
K-2971-KS HiFlow Rite-Temp valve with stops ❑ NA
* For a complete listing of all the Rite-Temp valves, refer to the K-304-* Specification Sheet or Roughing-In sheet.
Optional Accessories
88526 HiFlow Rite-Temp
®
thin wall installation kit ❑ CP ❑ Other ____
Installation Notes
Install this product according to the installation guide.
NOTICE: Risk of product damage. Long screws, for
installing trim, can damage the K-2971-KS valve. Consult the
trim installation guide to verify if the thin wall installation kit
(88526) is needed.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Install straight pipe or tube drop of 7″ (178 mm) to 18″
(457 mm) with single elbow between valve and wall-mount
spout.
Top of Bath
4" (102 mm)
5-3/4" (146 mm)
1/2"-14 NPT
72" (1829 mm)-
78" (1981 mm)
To Floor (Typical)
48" (1219 mm)
To Floor
(Shower Only)
3-3/16"
(81 mm)
Ø 6-3/8"
(162 mm)
10" (254 mm)
To Spout
(Bath Only)
3-3/16"
(81 mm)
4-9/16"
(116 mm)
6-7/8"
(175 mm)
Metal
Ceramic
For slip-fit spout,
1/2" nom. tubing must extend
2-1/8" (54 mm) Min; to
3-1/2" (89 mm) Max
beyond finished wall.
For 1/2" IPS spout,
pipe must extend
4-1/4" (108 mm)
beyond finished wall.
Product Diagram
BANCROFT
®
BANCROFT
®
BATH & SHOWER TRIM SET
Page2of2
1036173-4-
D