Specification Sheet

Features

•

For use with valves with a diverter

•

Complements Pinstripe

Suite

•

Lever handle

•

Requires a Rite-Temp

pressure-balancing valve

•

6-7/8" (175 mm) non-diverter spout with 1/2" NPT connection

Material

•

Premium material construction

Installation

•

Wall-mount

Required Accessories

K-11748 Series Rite-Temp® Valves

Codes/Standards

Adapters, Rough-in and Extension Kits

ASME A112.18.1/CSA B125.1

ASSE 1016

73418

DOE - Energy Policy Act 1992

KOHLER

Faucet Lifetime Limited

Warranty

See website for detailed warranty information.

Available Color/Finishes

Color tiles intended for reference only.

DescriptionCodeColor

Polished ChromeCP

Vibrant® Polished NickelSN

Vibrant® Brushed NickelBN

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

12-20-2016 08:49

Pinstripe

Bath and Shower Trim Set

K-T13133-4A

PAGE 1
Pinstripe® Bath and Shower Trim Set K-T13133-4A Features • • • • • For use with valves with a diverter Complements Pinstripe® Suite Lever handle Requires a Rite-Temp® pressure-balancing valve 6-7/8" (175 mm) non-diverter spout with 1/2" NPT connection Material • Premium material construction Installation • Wall-mount Required Accessories K-11748 Series Rite-Temp® Valves Adapters, Rough-in and Extension Kits 73418 Codes/Standards ASME A112.18.1/CSA B125.
PAGE 2
Pinstripe® Bath and Shower Trim Set K-T13133-4A 1/2" IPS Technical Information All product dimensions are nominal. Showerhead: Rated maximum flow: 2.5 gal/min (9.5 l/min) Pressure: 80 psi (5.5 bar) Notes Install this product according to the installation guide. Avoid cross-flow conditions. Do not install shut-off device on either valve outlet. Cap the shower outlet if deck-mount spout, diverter, or handshower is connected to the spout outlet.