Specification

(cont.) Required Accessories
K-2971-KS HiFlow Rite-Temp
®
valve with stops ❑ NA
* For a complete listing of all the Rite-Temp valves, refer to the KOHLER Price Book or K-304 Specification Sheet.
Optional Accessories
1061794 Deep rough-in kit ❑ NA
88526 HiFlow Rite-Temp thin wall installation kit ❑ CP ❑ Other ____
Installation Notes
Install this product according to the installation guide.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mount spout, diverter, or
handshower is connected to spout outlet.
Install straight pipe or tube drop of 7″ (178 mm) to
18″ (457 mm) with single elbow between valve and
wall-mount spout.
For K-2971-KS valve installations:
IMPORTANT! Risk of product damage. Consult the trim
installation guide to verify if the thin wall installation kit
(88526) is needed. Long screws can damage the K-2971-KS
valve.
6-11/16" (152 mm)
72" (1829 mm) To
78" (1981 mm) To
Floor (Typical)
Grooved
Cross Handle
3-1/4"
(83 mm)
3-1/4"
(83 mm)
Plain
Cross Handle
3"
(76 mm)
3"
(76 mm)
Grooved
Lever Handle
Plain
Lever Handle
48" (1219 mm)
To Floor
(Shower Only)
6-15/16"
(176 mm)
1/2"-14
NPT
11-1/4"
(286 mm)
Max
6"
(152 mm)
3-7/8"
(98 mm)
Product Diagram
PINSTRIPE
®
PINSTRIPE
®
SHOWER TRIM SET
Page2of2
1036140-4-
F