Specification Sheet

ManualsBrandsKohler ManualsBathroom FaucetsKohler Purist Wall Mount Bathroom Faucet - Less Drain Assembly

Features

•

Dual control wall-mounted

•

Brass construction

•

2.2 gpm (8.3 lpm) ﬂow rate

•

Lower ﬂow aerator options are available (refer to the

Kohler Price Book)

•

Cross or lever handles

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

•

ASME A112.18.1/CSA B125.1

•

IAPMO/UPC

•

NSF 61

•

Energy Policy Act of 1992 (EPACT)

•

ADA

WALL-MOUNT FAUCET

K-T14412

ALSO K-T14414, K-T14416

Colors/Finishes

•

CP: Polished Chrome

•

NA: None applicable

•

Other: Refer to Price Book for additional colors/ﬁnishes

Speciﬁed Model

Model Description

ADA ADA

K-T14412-3 Faucet with cross handles and a 6″ (15.2 cm) 90° spout ❑ CP ❑ Other ____

K-T14412-4 Faucet with lever handles and a 6″ (15.2 cm) 90° spout ❑ CP ❑ Other ____

K-T14414-3 Faucet with cross handles and a 9″ (22.9 cm) 90° spout ❑ CP ❑ Other ____

K-T14414-4 Faucet with lever handles and a 9″ (22.9 cm) 90° spout ❑ CP ❑ Other ____

K-T14416-3 Faucet with cross handles and a 12″ (30.5 cm) 90° spout ❑ CP ❑ Other ____

K-T14416-4 Faucet with lever handles and a 12″ (30.5 cm) 90° spout ❑ CP ❑ Other ____

Required Accessories

K-410-K Wall-mount valve ❑ NA

Optional Accessories on Page 2.

Product Speciﬁcation

Dual-control wall-mount faucet shall be of brass construction. Faucet shall be rated at 2.2 gallons (8.3 L) per minute. Faucet

shall have lower ﬂow aerator options. Faucet shall include cross or lever handles. Trim shall be Kohler Model K-T_____-

______-______ with K-410-K valve.

PURIST

Page 1 of 2

1018321-4-

USA: 1-800-4-KOHLER

Canada: 1-800-964-5590

kohler.com

Summary of content (2 pages)

PAGE 1
PURIST® Features • • • • • WALL-MOUNT FAUCET K-T14412 Dual control wall-mounted Brass construction 2.2 gpm (8.3 lpm) flow rate Lower flow aerator options are available (refer to the Kohler Price Book) Cross or lever handles ALSO K-T14414, K-T14416 Codes/Standards Applicable Specified model meets or exceeds the following: • • • • • ASME A112.18.1/CSA B125.
PAGE 2
PURIST® Optional Accessories K-7702 K-7710 K-7715 K-8801 ❑ CP Pop-up lavatory drain Lavatory drain Lavatory drain Duostrainer® sink strainer ❑ CP ❑ CP ❑ CP ❑ Other_____ Installation Notes Install this product according to the installation guide. 1-1/2″ (3.8 cm) to 6″ (15.2 cm) minimum must be maintained between the bottom of the spout and the top of the fixture rim. Three 1-1/2″ (3.8 cm) diameter cut-out holes are required for spout and handles. 9" (22.9 cm) 4" (10.2 cm) 1-1/2" (3.8 cm) 8-1/2" (21.