Installation Guide

Installation/Installation/Instalación
2
34
1
Strap Wrench
Clé à sangle
Llave de correa
Shower Arm and Threaded Spout Installation
Installation du bras de douche et bec fileté
Instalación del brazo de ducha y surtidor de montaje roscado
Install the 1/2" nipple.
Installer un mamelon de 1/2".
Instale el niple de 1/2".
Apply sealant tape
to the 1/2" nipple.
Appliquer de
l'étanchéité au
mamelon de 1/2".
Aplique cinta
selladora al niple
de 1/2".
The nipple should extend 1-1/4"
(32 mm) past the finished wall.
Le mamelon devrait s'étendre
de 1-1/4" (32 mm) au-delà du
mur fini.
El niple debe sobresalir 1-1/4"
(32 mm) de la pared acabada.
Carefully tighten the spout.
Serrer avec précaution le bec.
Con cuidado apriete el surtidor.
Thread the spout onto the pipe.
Glisser le bec sur le tuyau.
Deslice el surtidor en el tubo.
1153946-2-B 4 Kohler Co.