Dimensions Guide

Top of the Rim
Ø 6-1/2"
(165 mm)
3-1/2"
(89 mm)
48" (1219 mm)
to Floor
(Shower Only)
10" (254 mm)
to Spout
(Bath Only)
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
NoDrain included:
NOTICE: Risk of product damage. Long screws,
for installing trim, can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit (88526) is needed.
Avoid cross-flow conditions. Do not install shut-off
device on either valve outlet.
Cap shower outlet if deck-mount spout, diverter,
or handshower is connected to spout outlet.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between valve
and wall-mount spout.
ADA compliant when installed to the specific
requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-22-2020 10:40 - US/CA/MX
Purist
®
Rite-Temp
®
Bath and Shower Valve Trim
K-T14501-3