Installation Guide

3. Install the Spout

Threaded Spout Installation

Remove the temporary nipple.

Apply thread sealant to the 1/2″ nipple threads on both ends.

Install a 1/2″ nipple to extend the indicated distance beyond the

ﬁnished wall.

Apply a bead of plumbers putty or other sealant around the inlet

of the spout according to the manufacturer’s instructions.

Carefully tighten the spout with a clean strap wrench and remove

all excess putty.

Flush hot and cold water through the spout for one minute.

Slip-Fit Spout Installation

Remove the temporary nipple.

Apply thread sealant and install a 1/2″ copper tube so it extends

1-1/2″ (3.8 cm) to 2-7/8″ (7.3 cm) beyond the ﬁnished wall.

Deburr the copper tubing.

1/2" Copper

Tube

1-1/2" (3.8 cm) to

2-7/8" (7.3 cm)

Apply

plumbers

putty.

Setscrew

5/32" Hex

Wrench

Slip-Fit Spout

1/2" Nipple

3-7/8"

(9.8 cm)

1/2" Nipple

(17.8 cm)

Apply plumbers putty.

Threaded Spouts

Kohler Co. 5 1010464-2-B