Rough-In Guide

ManualsBrandsKohler ManualsShowersKohler Single Handle Rite-Temp Pressure Balanced Tub and Shower Trim with Single Function Shower Head from the Finial Traditional Series

Product Information

Applicable product:

Bath and shower faucet trim with

biscuit accents

K-T312-4F

Bath and shower faucet trim with

polished ﬁnish accents

K-T312-4M

Bath and shower faucet trim with

white accents

K-T312-4P

Lever handle is ADA compliant.

Required accessories:

Rite-Temp

valve with push-button

diverter, without stops OR

K-305-K

Rite-Temp

valve with push-button

diverter, with stops

K-305-KS

Installation Notes

Install this product according to the installation guide.

Avoid cross-ﬂow conditions. Do not install shut-off device on

either valve outlet.

Cap shower outlet if deck-mount spout, diverter, or

handshower is connected to spout outlet.

Install straight pipe or tube drop of 7” (17.8 cm) to 18” (45.7

cm) with single elbow between valve and wall-mount spout.

2-3/4" (7 cm) -

3-1/2" (8.9 cm)

Thick Wall

2-3/4" (7 cm)

Thin Wall

1/2" - 14 NPT or 5/8"

ID For 1/2" Nom

Copper Tubing

(5.1 cm)

(10.2 cm)

9" (22.9 cm)

1/2" Hot

1/2" Cold

4" (10.2 cm)

Without Stops

7" (17.8 cm) With Stops

(10.2 cm)

3-13/16"

(9.7 cm)

13/16"

(2.1 cm)

6-1/4"

(15.9 cm) D.

10"

(25.4 cm)

72" (182.9 cm) -

78" (198.1 cm)

Floor (Typical)

5-3/4" (14.6 cm)

1/2" - 14 NPT

2-3/4"

(7 cm)

1/2" - 14 NPT

Top of Bath

Roughing-In

K-T312

FINIAL

TRADITIONAL

BATH AND SHOWER FAUCET TRIM

FINIAL

TRADITIONAL BATH AND SHOWER FAUCET TRIM

1023642-1-