Specification

2-3/4"
Notes
Technical Information
For use with automatic compensating valves rated
at 1.6 gal/min (6.1 l/min) or less.
All product dimensions are nominal.
Faucet:
For use with automatic compensating valves rated
at 1.6 gal/min (6.1 l/min) or less.
8 gal/min (30.3 l/min)Flow rate:
45 psi (3.1 bar)Pressure:
Install this product according to the installation
instructions.
CompositeValve body:
Spout:
Adequate floor support is required.The wood
support must be a minimum of 2" (51 mm) thick
8-7/16" (214 mm)Spout reach:
by 6" (152 mm) wide. 2x6 lumber is NOT
adequate for this application.
3-1/2" (89 mm)Handle clearance:
Handshower:
Concrete can be used as the floor support.
Requires 3/16" masonry drill bit and six 1/4" x
1-3/4" concrete screws, not included.
2 gal/min (7.6 l/min)Rated maximum flow:
80 psi (5.5 bar)Pressure:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-6-2018 12:19
Artifacts
™
Floor-Mount Bath Filler Trim
K-T72790-9M