Installation Guide

8. Installation Checkout
Ensure the faucet handle is in the OFF position.
Remove the aerator from the spout.
Turn on the water supply and check for leaks.
Point the hose into the bath, and turn the faucet handle to the
ON position.
Pull the diverter out to send water through the hose to remove
debris.
Turn the faucet off to reset the diverter.
Turn the faucet on and run hot and cold water through the spout
to remove debris.
Check for leaks.
Turn the faucet off.
Reinstall the aerator, and install the handshower to the hose.
Position the handshower into the handshower holder.
Aerator
Handle
Handshower
Holder
Handshower
Diverter
Hose
Washer
Handshower
Kohler Co. 11 1246878-2-A