Installation Guide

6. Install the Faucet
NOTICE: Keep the faucet vertical during installation to avoid
damaging the faucet O-rings.
Make sure the water is turned off.
Carefully relieve the water pressure.
Remove the plug from the base.
Remove the rubber protector (not shown) from the faucet.
Position the faucet on the base, and insert the screws and washers
(provided) through the flange.
Tighten the screws using the hex wrench (provided).
Slide the escutcheon down onto the floor to cover the base.
Flange
Washer
Screw
Escutheon
Hex
Wrench
O-Rings
Plug
Base
Kohler Co. 9 1246878-2-A